Rotary Power Sweeping - Sorting out the 'BLACK' stuff!!
Rotary Power Sweeping - Sorting out the 'BLACK' stuff!!

SnapLok Specialist Rotary Power Heads

SnapLok Scrub Shaft - 4"/100mm
26.00 GBP
( VAT and shipping costs not included )

4"- 100mm Snaplok Scrub Shaft made in aluminium with stainless steel buttons. Can be used be

SCRB-SHFT

This 4" - 100mm SnapLok Scrub Shaft can be used on all the Snaplok rod range except the SnapLok 8mm rod system. The whip head can be placed under any whip head or placed further down the rod connections or if necessary you can join a multitude of them together. It comes with 24" x 4mm Copolymer whip line strands which can be cut down to your appropriate needs. The shaft is made from solid aircraft aluminium which makes it very lightweight and solid stainless steel SnapLok buttons.

RPS Small Clay Liner Breaker
29.00 GBP
( VAT and shipping costs not included )

RPS Small Clay Liner Breaker

CLAY-SML

The new ‘Hatchet’ breaker is lighter than other manufacturers breakers and therefore causing far less stress on the nylon rods, plus the new unique ‘Hatchet’ design shape has proved most effective when thoroughly tested and compared to other standard design shapes. 

 

The breakers come in a small 100mm x 100mm(4” x 4”) and suitable for 6” – 8” clay liner, also a large 150mm x 100mm (6” x 4”) for 8” plus flue sizes.

 

***LINER BREAKERS ARE ONLY SUITABLE FOR 18MM SOLID NYLON RODS - SNR18***

RPS Large Clay Liner Breaker
31.00 GBP
( VAT and shipping costs not included )

RPS Large Clay Liner Breaker

CLAY-LGE
SnapLok Adjustable Chain Tar Whip - CHW12
50.00 GBP
( VAT and shipping costs not included )

SnapLok adjustable chain tar whip is great for removing tar and creosote or even birds nests. It is ideal in terracotta/concrete lined flues. It can be adjusted from 12" to 18"(300mm to 450mm) very easily in less than a minute. This head MUST NOT BE USED IN STEEL LINERS

CHW12
SnapLok Adjustable Chain Whip Double - CHW-DBL
50.00 GBP
( VAT and shipping costs not included )

Additional chain whip head that can now double your existing SnapLok Chain Whip Head. Manufactured from solid aluminium, like the original takes only a matter of seconds to adjust the chain whip length from 12" to 18". This head MUST NOT BE USED IN STEEL LINERS

CHW-DBL
SnapLok Cable Loop 18" - 450mm - CBL450
40.00 GBP
( VAT and shipping costs not included )

The Cable Loop is a series of loops made of a single piece of steel cable. When inserted into the flue, the compressed tension provides just the right pressure to engage deposits in the flue for easier removal, popular with installers for pre-liner installations. MUST NOT BE USED IN STEEL LINERS.

CBL450
SnapLok Cable Nest Whip - 14"/350mm - CW350
36.00 GBP
( VAT and shipping costs not included )

SnapLok Cable Nest Whip 14" - 350mm. This is a great head for smashing up and removing birds nests, plus another tool for tar and creosote removal. The cable is made of stainless steel and has stainless steel caps that are crimped at the ends. This head MUST NOT BE USED IN STEEL LINERS

CW350
SnapLok Cable Nest Whip - 18"/450mm - CW450
36.00 GBP
( VAT and shipping costs not included )

SnapLok Cable Nest Whip 18"/450mm. This is a great head for smashing up and removing birds nests, plus another tool for tar and creosote removal. The cable is made of stainless steel and has stainless steel caps that are crimped at the ends. This head MUST NOT BE USED IN STEEL LINERS

CW450
SnapLok Replacement Cable Nest Whipline - 18"/450mm
25.00 GBP
( VAT and shipping costs not included )

SnapLok Replacement Cable Nest Whipline - 18"/450mm - Replacement whipline 4 x 450mm wire whip cable strands, 450mm/18" in length.

CW451
Snaplok Brush Retrieval Tool/Nest Remover 5" - 130mm - RTN5
40.00 GBP
( VAT and shipping costs not included )

Snaplok Brush Retrieval Tool/Nest Remover 5" - 130mm. This manual head is for retrieving any birds nest material or any brushes back down the flue. THIS HEAD SHOULD NOT BE USED WITH A DRILL.

RTN5
Snaplok Fan Whip 7" - FW07
30.00 GBP
( VAT and shipping costs not included )

Snaplok Fan Whip 7 " - A great bit of kit that sits behind a whip head, especially in long horizontal sections for blowing away or towards you, light fluffy soot. It creates a vortex behind the whip head, particularly in liners.

FW-07
Snaplok Fan Whip 10" - FW10
37.00 GBP
( VAT and shipping costs not included )

Snaplok Fan Whip 10" - A great bit of kit that sits behind a whip head, especially in long horizontal sections for blowing away or towards you, light fluffy soot. It creates a vortex behind the whip head, particularly in liners.

FW-10

An ingenious piece of SnapLok kit, this Fan Whip has been made to use below a whip head for helping remove really light dry soot. It creates a vortex in the flue to blow out the soot up through the chimney or liner.

 

It can also be reversed and used in long horizontal flues(Biomass) to help draw out the fluffy soot. 

CONTACT US

01884 675075

info@rotarypowersweeping.co.uk

Rotary Power Sweeping  will strive to achieve excellent customer service, providing expert advice from our own background and experience as HETAS Approved Chimney Sweeps. We provide premium quality professional chimney sweep tools and SnapLok rotary power sweeping equipment at a sensible price. 

SnapLok chimney sweep association RPS - HETAS Approved Chimney Sweeps
SnapLok chimney sweep association SNAPLOK IS USED BY APICS MEMBERS
SnapLok chimney sweep association SNAPLOK IS USED BY GUILD MEMBERS
SnapLok chimney sweep association SNAPLOK IS ENDORSED BY ICS AND USED IN THE ICS TRAINING CENTRE
NACS CHIMNEY SWEEP SNAPLOK IS APPROVED BY NACS
SnapLok chimney sweep association NIACS FULLY APPROVE SNAPLOK KIT
chimney sweep insurance Jelf Insurance - SnapLok Approved

RPS Van Sticker

Print Print | Sitemap
© Rotary Power Sweeping 2017 - Sorting out the 'BLACK' stuff!!

Call

E-mail